Commercial Refrigeration System
featuring the Tafco V (Value) Series
The Tafco V Series Commercial Refrigeration System is the most economical of the Tafco Refrigeration Systems. This conventional “mid-level” model is reasonably priced, while offering a host of extra features. It is also more highly energy efficient when compared to other refrigeration system models.
Tafco V Series Commercial Refrigeration System Data Sheet
The Tafco Refrigeration V (Value) Series Commercial Refrigeration System is built for high efficiency, lower compressor sound levels, and a compact low silhouette profile. The V Series is built like conventional outdoor systems. This series is available in both remote and pre-charged systems. Since all parts are mounted, installation is more efficient and cost effective. The V Series commercial refrigeration system comes with a 1 year warranty on parts and 60 days on labor.
Pre-Assembled Condensing Units Consist of the Following Parts Mounted:
• Copeland R404A hermetic, semi-hermetic, and scroll compressors
• Weather proof control panel and housing with raised base
• Copper tube, aluminum fin condenser
• PSC condensing fan motors use 30% less electricity than shaded pole motor
• High and low pressure controls
• Liquid line assembly, dryer, sight-glass, piping to outside
• Oil pressure control, where applicable
• Suction and liquid service valves
• Flooded condenser head pressure control
• Receiver with outlet shut-off valve
• Mounted electric defrost time clock in freezers
• 115 V air defrost time clocks, shipped loose
• Suction line assembly, filter, piping to outside
• Vibrasorbers (semi-hermetic models only)
Pre-Assembled Evaporators Consist of the Following Parts Mounted:
• Matching low profile evaporator to condensing unit
• Expansion valve
• Liquid line solenoid
• Mechanical thermostat
• ECM evaporator fan motors: 115 V coolers and 220 V freezers
• ECM evaporator fan motors use 71% less electricity than shaded pole motors
• Electric defrost freezer evaporators, 220 V
• Air defrost cooler evaporators, 115 V
Pre-Assembled System Options:
• Dual matching evaporators
• Oversized receivers
• Insulated and heated receiver
• Hot gas bypass, requires hot gas line to evaporator
• Copper finned and copper pipe condenser coil
• Copper finned and copper pipe evaporator coil
• Receiver relief valve in lieu of fusible plug
• Oil separator
• Suction accumulator
• AST condensing coil coating
• AST coating evaporator coil
Pre-Charged Units Add the Following:
• The Correct refrigerant charge in the receiver for the system
• Single use quick connect fittings mounted to the evaporator(s) and condensing unit
• Refrigeration line set: 10’, 20’, 30’, 40’, and 50’
• Evaporator voltage matches the condensing unit voltage
• Wiring harness
* All Tafco Refrigeration Systems meet or exceed the 2007 EISA standards.