green initiativesTafco is the industry leader in quality and energy efficiency. We take great pride in producing walk-in coolers, freezers, and refrigerated warehouses that will provide many years of service and savings. Our refrigeration units are clearly the most efficient in the business. Pair this with our environmentally friendly CFC-free “Green” foam panels, and there is no comparison! With all the environmentally friendly changes that have been recently added to our outstanding quality walk-ins, now is a better time than ever to choose Tafco for your walk-in needs.

Tafco Eco-Temp offers a winning combination of energy savings, lower installation costs, and increased reliability. We have significantly increased the condenser surface, giving the same size condenser a 20% larger capacity. This results in a reduction of condensing temperatures and operating head pressures, which leads to an initial energy savings of up to 10%. Tafco then adds an extra sub-cooling and floating head feature to further increase your energy savings. The floating head feature provides up to 30% in additional savings in low ambient conditions.

2009 Federal Energy Requirements

REQUIREMENT

HOW TAFCO COMPLIES

Doors must have automatic door closers that close the door fully within 1" of the closed position required for all doors, except those wider than 3'9" or taller than 7'0".

All TAFCO doors are provided with an automatic spring or hydraulic door closer.

Strip doors, spring hinges, or other methods of minimizing air infiltration are required when doors are opened.

All TAFCO Doors are provided with spring loaded hinges.

Wall, ceiling, and door insulation must be at least R-25 for coolers and R-32 for freezers.

All TAFCO coolers and freezers meet and exceed this requirement with factors of over R-29 and R-32, respectively, on standard 4" panels.

Floor insulation must be at least R-28 for freezers.

All TAFCO floors meet this requirement by having at least an R-28 value.

Evaporator fan motors of less than one horsepower and less than 460 volts are required to be electronically commutated (ECM) motors, or 3-phase motors.

All TAFCO refrigeration evaporator fans less than one horsepower use electronically commuted motors.

Condenser fan motors of less than one horsepower are required to be electronically commutated (ECM), permanent split capacitor (PSC), or 3-phase motors.

All TAFCO refrigeration condenser fans less than one horsepower use permanent split capacitor (PSC).

For all interior lights, use light sources with an efficiency of 40 lumens per watt or more, including ballast losses (if any), except that light sources with an efficiency of 40 lumens per watt or less, including ballast losses (if any), may be used in conjunction with a timer that turns off the lights within 15 minutes, when the walk-in is not occupied.

All TAFCO Boxes meet this requirement by using LED lights that last a minimum of 50,000 hours. The LEDs come on instantly, no matter what the temperature, contain no mercury, generate 95% less heat, and use 88% less energy than an incandescent bulb.

The seventh requirement calling for transparent reach-in doors for walk-in freezers and windows in walk-in freezer doors shall be of triple-pane glass with either heat-reflective treated glass or gas fill.

All TAFCO boxes use triple-pane glass that is gas filled for vision windows and triple-pane gas filled, heat reflective glass doors using doors that exceed the requirements and claim 60% energy savings over standard doors.

TAFCO

1101 Graham Street • PO Box 269
Hyde, PA 16843

TF: 800.233.1954 • Tel: 814.765.9615
Fax: 814-765-5410

ISO
ISO 9001:2008 Certified
Quality Management System

READ MORE

buy american icon